McKinney Fix-It Pros · design systemguide
chapter 2

Logo, mark and usage

2.1 What the logo is

A gear with a crossed hammer and wrench, beside the name in two lines of capitals with a lowercase "c", over the descriptor "Handyman & Repairs". It is a redraw of the live raster logo, made for this system on 2026-11-16 and awaiting the owner's sign-off. The name is set in Plus Jakarta Sans ExtraBold and converted to outlines; the descriptor is DM Sans Bold. "Est. 2008" from the old badge is left out until the founding year is confirmed (15.7).

It is not a wordmark to retype, and the gear is not a decorative pattern.

The reversed logo lockup centred on slate, as used on the business card front
The lockup, reversed on slate.

2.2 Files

File Colourway Use
logo/lockup-primary.svg Slate gear, ink name, terracotta descriptor Paper and white backgrounds
logo/lockup-reverse.svg White gear and name, light terracotta descriptor Slate and ink backgrounds, photographs under the veil
logo/lockup-ink.svg One colour, ink One-colour print, fax, stamps
logo/lockup-white.svg One colour, white Embroidery on navy, cut vinyl on dark paint, email header
logo/mark-slate.svg, mark-white.svg, mark-ink.svg Gear alone Favicons, avatars, cap, tape measure, stickers
logo/mark-app-slate.svg, mark-app-paper.svg Gear on a rounded square App icon, social avatar
logo/png/* Raster copies at 600–1600 px Email, documents, reference for mockups
logo/favicon/favicon-16…512.png App-icon mark Favicon and touch icons

Vendors always receive the SVG.

2.3 Clear space and minimum size

Clear space on every side equals the height of the capital "M" in the name. Nothing enters it.

Medium Lockup minimum width Mark minimum
Screen 120 px 16 px
Digital and offset print 1.25 in (32 mm) 0.25 in (6 mm)
Screen print 2 in (50 mm) 0.5 in (13 mm)
Embroidery 3 in (76 mm), descriptor dropped below 3.5 in 0.75 in (19 mm)
Cut vinyl 8 in (200 mm) 2 in (50 mm)

Below 120 px on screen, use the mark alone.

2.4 Placement

2.5 Do not

  1. Retype the name in another font or weight.
  2. Recolour the gear terracotta. The descriptor is the only terracotta part.
  3. Put the primary lockup on slate or a photograph; use the reverse.
  4. Add "#1", stars, or a slogan to the lockup.
  5. Stretch, outline, shadow or tilt it.
  6. Use the old grey raster file.
  7. Let an image model redraw it: mockups use the supplied PNG, and vendors get the SVG.